Your Location : Home >> Products >> Sintered NdFeB Magnets >> NdFeB RingsNdFeB Rings
NdFeB Rings
Ring Sintered NdFeB Description:
Ring Magnets is one popular shape of Rare earth magnets and perment magnets.
It is always manufactured via Cutting,Slicing,Drilling, and grinding etc .Ring magnets have the following important factors such as ,Outer Diameter,Inner Diameter,Thickness etc
It is always manufactured via Cutting,Slicing,Drilling, and grinding etc .Ring magnets have the following important factors such as ,Outer Diameter,Inner Diameter,Thickness etc
Material Grade of NdFeB magnets:
Magnet N-( N35, N38, N40, N42, N45, N48, N50,N52),
Magnet M-(35M, 38M, 40M, 42M, 45M, 48M),
Magnet H-(35H, 38H, 40H, 42H, 45H),
Magnet SH-(30SH, 33SH, 35SH, 38SH, 40SH, 42SH,45SH),
Magnet UH-( 28UH, 30UH, 33UH, 35UH, 38UH),
Magnet EH-(28EH, 30EH, 30EH, 33EH, 35EH)
1) Application of NdFeB magnet: Toys, package, Printer, Switchboard, Phone, voice coil motors (VCM's) in hard disk drives, high performance motors, brushless DC motors, magnetic separation, magnetic resonance imaging, sensors, loudspeakers etc.
2) The coating of NdFeB magnets can be Zn, Ni, Ni-Cu-Ni, Epoxy, CR3+ZN, NI+AG, NI+AU.
3) Our factory can also manufacture various sizes of NdFeB magnet, according to the customer’s specification
Magnet N-( N35, N38, N40, N42, N45, N48, N50,N52),
Magnet M-(35M, 38M, 40M, 42M, 45M, 48M),
Magnet H-(35H, 38H, 40H, 42H, 45H),
Magnet SH-(30SH, 33SH, 35SH, 38SH, 40SH, 42SH,45SH),
Magnet UH-( 28UH, 30UH, 33UH, 35UH, 38UH),
Magnet EH-(28EH, 30EH, 30EH, 33EH, 35EH)
1) Application of NdFeB magnet: Toys, package, Printer, Switchboard, Phone, voice coil motors (VCM's) in hard disk drives, high performance motors, brushless DC motors, magnetic separation, magnetic resonance imaging, sensors, loudspeakers etc.
2) The coating of NdFeB magnets can be Zn, Ni, Ni-Cu-Ni, Epoxy, CR3+ZN, NI+AG, NI+AU.
3) Our factory can also manufacture various sizes of NdFeB magnet, according to the customer’s specification
4)Production Process:
5) Machining Process:
Diameter<6mm--- Grinding block into rod shape--Drilling hole-Cutting-Plating
Diameter>6mm--- Grinding cylinder to accurate size--Drilling hole--cutting-Plating
Pictures for reference:
The part of shapes we ever made for reference:
